Tutorial Giftcard holder (Using a envalope! )

My Ladybug giftcard holder! <3 KaDoodle Bug Design File!

Pick a envolope u want use as base for the giftcard holder, fold it in the midle as the pic shows

Cut it until you reach the fold lind as in de pic

Glue the envelope part down or lick it, just 1 half!

Adjust the corner of the flap to match the other corner

Now you have your pocket for the giftcard

turn the envelope, and glue or tape from left to right to attach your ribbon

Tada ribbon is glued on the card ;) (make sure you can tie the ribbon... this ribbon was horrible to tie so i had to change it later :( )

i first glued 2 black parts om the outside of the giftcard holder

Now i glue down my design paper

Same on inside... first the black

then a design paper that i liked

Punch or cut a half circle, so you can take out the giftcard more easy

glue it on the other side

i punched out another circle glued a ladybug on it as a docaration and your giftcard holder is finished! Super easy but super cut!